Cadem ~ Template by entiri

Blog

Fixing Concrete Cancer

Craig Harwood - Friday, April 17, 2015
Concrete spalling also known as “Concrete Cancer”  is the result of the lack of effective waterproofing being employed to protect the concrete and the re-enforcement steel within the concrete. This is particularly difficult issue on the Gold Coast with many buildings built in the 1970’s through Early 1980’s without appropriate care to materials, design and specification necessary to guard against the effects of salt air and water.
 
Of particular concern in coastal areas is external cantilever balconies. It is possible for the balcony to deform from weight over a period of time and open up cracks usually near the join of the balcony and the main structure. This in turn allows rain and salt spray to be washed into the concrete re enforcement creating corrosion and spalling. This has the potential to be a major issue and all such balconies should be regularly inspected and issues dealt with quickly.
 
 
Concrete spalling is not just an issue in coastal areas or the outside of building and can occur in any area where concrete is subjected to water. Typically we see this in basements or under podiums that are subject to water penetration and is simply the result of oxidation or rusting of the re-enforcing steel inside the concrete (ask us about waterproofing injection systems for podiums). Whilst salts do speed up the process any water making its way to the re-enforcement will Carry oxygen to the steel, additionally acid rains and various pollutions from motor vehicles and industry when carried by water can increase the deterioration of the re-enforcement. By the time you see crumbling or cracking of concrete from the swelling of the steel underneath the process is well underway and usually will require quite a deal of tracing back to remove effected concrete and steel locate the source of the water and deal with the ingress and then the effected concrete replaced and sealed again.
 
Another possible cause can be leaking pipes buried within the concrete. Often the water from the leak will track along the outside of the leaking pipe and slowly eat into the surrounding concrete. Usually this is easily corrected with the pipes exposed and removed to give access to the affected area remedial work on the concrete can be undertaken and then the pipes replaced. 
 
 
 
In this case a damp patch was evident and small leak in a pipe was suspected. Once uncovered a leaking pipe was evident, however it was found that water had followed the pipework and created further damage to the concrete.
 
 
The repair job whilst still a relatively small job now involved tracing back the pipework to the extent of the water damage and effecting repairs along the pipework in the area.
 
 
The finished job is now ready for painting.
 
Waterproofing is not a job you can take shortcuts with and just stopping water entering an area is often not enough as it will find a new path unless dealt with effectively the first time.
 
In all cases of water penetration acting early can save major damage and cost in the future and by using only qualified waterproofing specialists like Xycrete you can ensure your job is completed to highest standards 

Service Updates

Craig Harwood - Wednesday, April 15, 2015

Lorem ipsum Est veniam ex culpa irure nulla quis occaecat ut fugiat dolor sint sit anim sed ea incididunt incididunt sint qui sint ex quis eu occaecat aute do magna velit dolore dolore labore in cillum amet dolor sit nostrud in eu exercitation elit voluptate cupidatat pariatur

ex exercitation in quis nostrud aute deserunt velit mollit minim officia ullamco ullamco culpa velit eiusmod laborum et minim est ad laborum mollit mollit dolor consectetur in dolor sit cupidatat do est sed commodo ea in cupidatat reprehenderit veniam minim pariatur anim ad veniam qui labore adipisicing qui anim velit labore proident velit veniam esse ullamco aliquip dolor ut do sit velit ut ut consequat voluptate enim enim est aliqua voluptate et nisi cupidatat aliquip veniam dolore aliquip non non nostrud aute consectetur commodo non ullamco nostrud ullamco mollit sed aliqua qui veniam ullamco sunt officia pariatur ad minim laboris nulla labore sunt Duis ea sint officia dolor in et.

Clem 7 Tunnel

Craig Harwood - Wednesday, April 15, 2015
Xycrete has been heavily involved in waterproofing the Clem 7 Tunnel. Xycrete was the only company with a full compliment of staff that had been trained overseas in the injection systems (equipment and chemicals) used to waterproof the joints in the Clem 7 Tunnel and smoke stacks.
 
  
 
Once out of the main Clem 7  Tunnel and into the smoke or exhaust stacks there is no permanent lighting or power, so work was undertaken with miners lamps and limited portable lighting. We supplied generators and portable compressors suitable for confined spaces and our staff worked 60 metres below the Brisbane river 12 hour shifts days and nights to complete what is a difficult job in an extreme location. 
 
Injection jobs can be difficult as we often don’t know the history of what is behind the wall or has been used as a base for a podium garden making waterproofing even more challenging. Because of this and the range of specialist equipments and chemicals available it is important to use only qualified professional water proofers to undertake these jobs.
We are extremly proud of the team at Xycrete and the additional hours and effort they put into finishing the tunnel work.

Should You Consider Admix?

Craig Harwood - Wednesday, April 15, 2015

Xycrete utilities a wide range of waterproofing materials and techniques. We can assist builders and architects determine the most suitable products for any application. 

One option is utlising admixture. Admixtures can have a number of benefits over membranes in many applications.  

In this post we will look at cost as this obviously is one of the major factors in the design and specification process and also one were there are some misconceptions.

I often hear some people mistakenly say that using Admixtures is more expensive that waterproofing concrete with a membrane system.

This simple error happens because the two systems are quoted in a different way. The Admixtures are quoted in a cubic metre price whilst the membrane is quoted in a square metre price. Eg using round figures as an example you may be quoted an installed price of $35.00 Sq Metre for Membrane however using admix could be $70.00 / cubic Metre.

So say for a 1000 sq Metre slab of 350 mm thick the costs will look like this.

Membrane 1000sq Mt x $35.00 therefore cost = $35,000.00
Admix (1000sq Mt x.35mm thick) 350 Cubic Metres x $70.00 = $24,500.00

In actual fact the Admix is less than half the cost and you have a saving of $10,500.00

Some additional allowance needs to be made for sealing any penetrations for fittings etc. however this is generally minimal, so the cost of the admix is usually significantly less. The additional benefit when using the Krystol product is the self-healing capability of the crystaline admixture.

So when pricing up your jobs, by utilising admixtures in the pour, some significant savings can be achieved, along with the added benefits that admixtures can provide. 

1

Search

Categories

Tags